RAL 7040 Grey Color Smooth Gloss Epoxy Polyester Powder Coating
Powders for shelving
Advantages of Thermosetting Gloss Powder Coat:
Our Thermosetting Gloss Powder Coat have many advantages,such as
Good adhesion,anti-corrosion,UV resistant, strong coating
film,Accurate colors, good leveling and so on,we believe that we
PURDA powder coating is your best choice.
1. Healthy and environmentally friendly.
It eliminates the harmful effects of various liquid chemical
additives such as film formation, dispersion, wetting, leveling,
anti-corrosion and mildew resistance added to achieve coating
performance.
2, convenient transportation and storage
Ordinary coatings contain about 20-50% water or solvent, while
powder coatings have neither water nor solvent. They are completely
solid, convenient and safe to transport. In addition, water or
solvent coatings have low transport and storage temperatures. At 0
° C, it tends to freeze, and powder coatings do not have this
problem.
3, paint smell
Compared with the traditional paint odor residue, this paint can be
dissipated quickly, which can be said to be instant.
Surface Type of our Thermosetting Gloss Powder Coat:
We can supply many kinds of surface type,such as
Gloss,matte,wrinkle,sand grain,antique, Hammer,crocodile skin, wood
effect,candy,chrome,transparent,semitransparent,metallic,and if you
need special pattern,we also can custom as your requirement.
Color of theThermosetting Gloss Powder Coat we can supply:
RAL color :we usually use RAL colors that is widely used in paint
industry and easily find in market
Custom color : Color matching is available , if you have colors
model ,please send to us for matching.
SPECIFICATION:
| Main Material | Polyester resin,barium sulfate,titanium dioxide |
| Surface Type | Gloss,matte,wrinkle,sand grain,antique, Hammer,crocodile skin, wood
effect,candy,chrome,transparent,semitransparent,metallic,and
special pattern |
| Powder Properties | Specific gravity : 1.3 - 1.75 (depend on colors) |
| Average particle size : 35 - 45um |
| Coating Properties | Film thickness(ISO 2178) :60 - 90 μm |
| Coverage:15㎡ based on 60μm |
| Pencil hardness: ASTM D3363,H-2H |
| Adhesion :GB/T 9286-1998,0 grade |
| Bending test:GB/T 6742 ,=<2mm |
| Cupping test:GB/T 9753,>=7mm |
| Direct and reverse impact (ASTM D2794) : > 50kg.cm |
| Salt spray Resistance ( ASTM B117, 1000hrs)(Maximum undercutting ,1
mm ): No blistering or loss of adhesion |
| Heat and moisture test GB/T 1740,>=1000 hours,no change |
| Application Schedule | Applied by : Electrostatic spraying devices |
| Curing schedule :10 minutes at 200 ℃ |
| Advantage | Good adhesion,anti-corrosion,UV resistant, strong coating film, |
| Accurate colors, good leveling |
| Shelf Life | 12 months
|
